KEENAN MechFiber 250 and
280 Operator’s Manual
17
Revision C01, 04
th
Dec 2019
7.2. Hitch height adjustment
The MechFiber250 and 280 hitches have been designed to allow for various hitch height
options with the same components used. Hitch height is normally selected for the application
and set at the factory. However, if required, the hitch can be adjusted on-farm to level the
machine. Some options are shown below.
Standard Hitch
High hitch (typically for the German market)
Clevis hitch (typically for the U.S. market)
Note:
Care must be taken when adjusting the hitch height, so that there is adequate PTO
clearance and that there is enough ground clearance below the stand.
