All
SportSystems, Inc.
©
2019.
Step 17 - Attach Screen to Tee Pole
Your screen will attach to the tee pole. Tee pole should be approximately 9 to 12 inches from the
back of the enclosure and the baffle net should already be installed.
● If your screen has the SideRight™ Tensioning Kit upgrade, the velco strips should face to the
front and the blackout trim (sewn to the screen) should face to the back.
● Attach your video hitting screen with cable ties to the tee pole.
● Do not tighten screen all the way up to the pole. The Tee Pole may sag some in the middle.
To avoid transferring the pole sag to the screen, attach the screen as shown in the diagram
below. Allow the outer edges of the screen to hang slightly lower than the center, keeping
screen even with the floor.
Page 27 of 47
Rev June 6, 2019
