All
SportSystems, Inc.
©
2019.
Step 2 - Build Bottom
●
Place the bottom rear width pole in the location where you desire the rear of your
hitting bay to be located. SuperBay™ enclosures should have extender poles already
attached to the width pole from previous step.
Tip:
Always position the eye bolts facing
down and toward the inside of the enclosure.
●
Add two
3-way corner
connectors to each end of above width pole.
● Insert two
Bottom Depth
poles into the bottom rear 3-Way corners, one on each side.
● Add two L-Corner brackets, to the front end of the bottom depth poles, pointing
upward.
● This establishes the bottom of your frame. Tighten all connectors.
Page 10 of 47
Rev June 6, 2019
