All
SportSystems, Inc.
©
2019.
BUILDING THE ENCLOSURE FRAME
Frame Diagram
Refer to this diagram often to identify connectors and poles needed for the step by step instructions on
the following pages.
Note
that the 10 Wide SuperBay™ does not use inline couplers to extend the
length of the width poles.
2 ea L Corners
2 ea Tee Connectors
6 ea 3-Way Corners
4 ea Inline Coupler
(SuperBay™ only)
Note:
Each corner bracket adds approximately 1.5” to size of your enclosure. Therefore, once poles and
brackets are assembled an additional 3” will be added to the finished width, height and depth of your
enclosure. Therefore, all poles are cut 3” shorter than the finished height, width, or depth of the enclosure.
If
you have ordered a
custom
sized enclosure make note of this factor when cutting your poles
.
Page 8 of 47
Rev June 6, 2019
