All
SportSystems, Inc.
©
2021
Step 6 - Add Top Depth Poles and Screen Pole
Insert the two remaining Depth poles into the Top Rear 3-Way corners and tighten these connectors.
Slide a T-connector onto the front of each top Depth pole.
For SkyRailPlus™/SkyBridge™
configurations T-Connectors are not needed.
Insert WIDTH pole into T-Connectors. This will create the Screen pole where your screen will hang.
Temporarily slide the Screen Pole back toward the rear of the enclosure as far as possible, this will
make installing the last width pole on the front of the enclosure easier.
For SkyRailPlus™/SkyBridge™
configurations see SkyBridge™
for instructions
on installing this pole.
Page 36 of 39
Last Revised 8/5/21
