All
SportSystems, Inc.
©
2021
Complete cable assembly
Complete cable assembly by 1) determining proper length 2) forming the eye and 3) trimming off
extra cable. Follow the steps below …
1) Thread two wire clips onto
the cable and form a loop
in the cable around the
hook end of the turnbuckle.
2) Thread the dead end of the
cable back through the
wire clips. Tighten wire
clips with a wrench.
3) TRIM extra cable and
tighten turnbuckle to
provide tension on the
cable.
Page 23 of 35
Last Revised 6/7/22
