PG. 8
Step 9
Check around the outside of the cabinet, if there are any screws sticking out now is the
time to remove them from the inside of the cabinet. There are two different types of
screws that may need to be removed. To remove the screws on the sides of the
cabinets you may need to unscrew the stopper (circled in red).
Step 10
Take the modules out of the box and connect the magnetic screws. For each module
attach 8 screws, 4 along the top and 4 along the bottom.
Step 11
Attach the magnetic screws to the modules. For each module there should be 8 screws
attached along the top and bottom as in the diagram below. Now attach the modules
to the cabinets, for each module you need to connect a power cable and data cable,
Please note:
You can do this by hand or by using a standard drill
