![background image](http://html1.mh-extra.com/html/allo-com/agg04/agg04_user-manual_2903733019.webp)
GSM Gateway User Manual
www.allo.com Version 2.0 19
Account Name
Descriptive name for the SIP Trunk for user's reference.
Username
Username of endpoint (e.g.: IPPBX) will use to authenticate with
the gateway.
Registration Mode
Whether the endpoint will register to this gateway or this
gateway will register to the endpoint.
a.
None: No Registration, IP Address peering of the
Gateway & Endpoint
b.
To Gateway: Endpoint (IPPBX or VoIP Service Provider)
register with the Gateway
c.
c) From Gateway: Gateway register to the End point
(IPPBX or the VoIP Service Provider)
Authentication
Enable, if Authentication is required by the End point (VOIP
Service Provider or IPPBX)
Auth. Username
A username to use only for registration.
Password
Password to authenticate inbound or outbound registrations or
calls.
Proxy Address
IP address or hostname with port of the endpoint (VOIP Service
Provider or IPPBX) where the calls will be diverted. Default port
no.:
5060
Outbound Proxy Address
IP address or hostname with port of the outbound proxy server.
This ensures that all the SIP packets are sent via specified proxy.
Specifying the port is not mandatory. Default port no.:
5060
e.g.: 192.168.0.222:5062 OR 192.168.0.222
Register
Enable, if Registration to the End point (VOIP Service Provider or
IPPBX) is required.
Registrar Address
IP address or hostname with port of the Registrar server where
gateway must register to. Specifying the port is not mandatory.
Default port no.:
5060
e.g.: 192.168.0.222:5062 OR 192.168.0.222
Bridge PIN
You can set a PIN for outgoing calls on SIP trunk, thus you will
set one more level of security. Leave it blank for unsecured
mode.