![background image](http://html1.mh-extra.com/html/allo-com/agg04/agg04_user-manual_2903733011.webp)
GSM Gateway User Manual
www.allo.com Version 2.0 11
2.2 Accessing the Web GUI
GSM Gateway WEB GUI can be accessed by getting IP address of GSM Gateway through MAC
address scanner or If you know the SIM No, you can directly manage the GSM Gateway using
below comment by sending the SMS.
ALLOGSM “gateway password” INFO
(Command to fetch
the IP address of the gateway and basic status of GSM spans)
For an Example:
ALLOGSM admin INFO
1) Make the setup as described in Hardware setup section, Lets access the WebGUI.
2) Launch the web browser and enter the IP address URL http://192.168.XXX.XXXof the GSM
GATEWAY..
Figure 5: Login Page
3) Login using the default username & password (Default: Username: admin; Password: admin).
It takes you to change the password and login again with the new password. Observe the WAN IP
address on the dashboard, this will be used to access the GUI from the WAN interface.
4) If your network is not enabled with DHCP server, configure the WAN port IP address manually
in the
SETTINGS > Network Settings
section as per your requirement.
Recommended Web Browser to access GUI is Mozilla Firefox.