27
Login
Specify the
Username
that is given by your ISP.
Password
Specify the
Password
that is given by your ISP.
Service IP Address
Specify the
Service IP Address
that is given by your ISP.
Connection ID
Specify the
Connection ID
that is given by your ISP.
MTU
Specify the Maximum Transmit Unit size. Suggest remain in Auto.
Type
Select Connection Type from drop down menu.
Keep Connection
: Device is connected to internet automatically.
Automatic Connection
: Device is automatically connected to internet when the
traffic goes through internet but it will disconnect when a period of idle time
Manual Connection
: Connect to internet manually.
Idle Timeout
Specify the maximum idle time for
Automatic Connection
.
Enable PPTP pass through
on VPN Connection
Place a Check to enable
PPTP pass through on VPN Connection.
If this
feature
disabled, it will cause unable to connect to internet via PPTP.
Enable IPSec pass through
on VPN Connection
Place a Check to enable
IPSec pass through on VPN Connection.
If this
feature
disabled, it will cause unable to transmit IPSec Protocol.
Enable L2TP pass through
on VPN Connection
Place a Check to enable
L2TP pass through on VPN Connection.
If this
feature
disabled, it will cause unable to connect to internet via L2TP.
Apply / Cancel
Press
Apply
to apply the changes or
Cancel
to return previous settings.
Caution: If the router's MTU is set too high, packets will be fragmented downstream. If the router's
MTU is set too low, the router will fragment packets unnecessarily and in extreme cases may be
unable to establish some connections. In either case, network performance can suffer.
