15
Connect
After you selected the radio button, press Connect to process the connection.
Caution: If you select 5G as your default wireless network, you can not scan the Access Point which is
operated in 2.4G band.
4.4 AP Scan List (5G / 2.4G)
This feature can help you to select the Access Point Channel by scan nearby Access Point status.
Refresh
Press Refresh to scan again.
4.5 Wireless Security Settings
Wireless Security Settings section will guide you to the entire Security modes configuration: WEP,
WPA(TKIP), WPA2(AES), WPA2-Mixed, and Radius. WPA(TKIP), WPA2(AES), and WPA2-Mixed are all
under
WPA pre-shared key
section.
We are strongly recommended that uses WPA2-PSK AES as your security settings.
4.5.1 WEP (Access Point)
ESSID Selection
ALL0305 supports up to 4 different SSIDs. Each SSID can be set to different
authentication type.
Hidden SSID
Select
Enable
or
Disable
broadcast SSID.
WMM
Select
Enable
or
Disable
WMM function. WMM is based on the four Access
Categories: voice, video, best effort and background. WMM function is not used to
guarantee transmission speed.
Encryption
Select
WEP
from the drop down list to begin the configuration.
Authentication Type
Select
Open System
or
Shared Key
as your authentication type.
Key Length
Select Key Length in 64/128bit password length.
Key Type
Select Input Type in
Hex
or
ASCII
.
Default Key
Select the default index key for wireless security.
Key1
Specify password for security key index No.1.
Key2
Specify password for security key index No.2.
Key3
Specify password for security key index No.3.
