19
sometimes cause unable to connect to the network. On the other hand, the lower
transmit power will cause client unable to connect to the device.
Distance
Specify distance rage between AP and Clients. Longer distance may lose high
connection speed.
Layer 2 Isolation
Select the Radio button to enable or disable Layer 2 Isolation. Layer 2 isolation
prevents communication between wireless stations associated to different APs
4.6.2 Advanced Settings (Client Bridge / Client Router)
Fragment Threshold
Specify package size during transmission. If large amount of client are accessing to
the network, specify small number of the fragment length in order to avoid collision.
RTS Threshold
Specify Threshold package size for
Request To Send
(RTS). Using small number of the
threshold will cause RTS packets to be sent more often to consuming more of the
available bandwidth. In addition, if the heavy load traffic occurs, the wireless
network can be recovered easily from interferences or collisions.
Preamble Type
Select the Radio button to choose Long Preamble or Short Preamble. Long Preamble
can increase the capability of wireless network and wireless signal range. Short
Preamble can increase the efficiency of the wireless network.
802.11g Protection
Select the Radio button to Protect types. When enable the protection mode, every
time the packet is transmitted, it has to wait the CTS is received. In addition,
Protection mode can prevent the collision but it will slow the wireless transmission
speed.
Tx Power
Select Tx Power to increase or decrease Transmit Power. Higher transmit power will
sometimes cause unable to connect to the network. On the other hand, the lower
transmit power will cause client unable to connect to the device.
Distance
Specify distance rage between AP and Clients. Longer distance may lose high
connection speed.
