40
3. The structure of menu tree is shown in
Figure 4-4
. Users can use the
following keys to select the parameter you want to change or add. The
definition of the parameters is described in
Table 4-1 to Table 4-14
.
Up/Down or i/k key
: move the cursor up/down to the specific
item.
Right or l or Enter key
: select the item or enter to sub-menu.
Left or j key
: return to previous menu page.
Home or Ctrl-A
: move the cursor to the first item of the menu
page.
End or Ctrl-E
: move the cursor to the last item of the menu
page.
Ctrl-Q or F1
: Show the help page.
Hint 1: * denote the function is displayed after
enable configuration
mode
is enabled.
Hint 2: In item su, type default password
root
to enter the supervisor
configuration mode.
41
Figure 4-4
Su
Setup
System
Ian
Address <ip> <netmask>
Attrib <Enable | Disable> <Global | Virtual>
Bridge <Enable | Disable>
Wan
Address <ip> <netmask>
link - Type <Disable | Ethernet | PPP
>
Attrib <
| PPPoE
Enable | Disable> <Global | Virtual>
ether_interface <interface>
Bridge <Enable | Disable>
ISP <ISP Index> <idle disconnect time> <Dial priority>
ISP
*ISP_ profile <ISP name> <ISP destination>
*account - profile <Access account> <Passwd>
Configuration
<name> <pass_conf> <ip>
Upgrade
image
webimage
bootstrap 2
<ip> <file>
<ip> <file>
<ip> <file>
*Enable
Monitor
Wan
Config_access [Generic| Profile | Pool]
(CR)
Passwd <
pass_conf>
*System
OP _ mode <Router | Bridge | Host>
hostname <name>
default _ route <ip>
PPP
Peer_address <ip>
User_profile <name> <pass_set0>
Summary of Contents for ALL0199AP
Page 26: ...48 Weight 2100 g 49 ...
