9
Installation
6-1622410 Rev.1 01/10/2019
Connect the garage door operator to electrical power and controls
Warning high voltage:
•
Pull out the main plug from the mains socket before you open the cover of the drive head.
•
Do not connect any live leads. Only connect potential-free buttons and potential-free relay
outputs.
•
After connecting all cables, connect the cover to the drive head again.
Warning:
Before using the operator for the first time, it must be tested to make sure that it is working properly
and safely (see section on Maintenance/Checks).
Warning:
Danger by optical radiation!
If you look at an LED for an extended period from a short distance, this can cause optical binding.
Sight is then severely restricted for a short time. This can result in serious or fatal injuries.
You must not look directly at an LED.
H G
F E
1. External antenna
Lead the antenna upward through the housing recess.
When using an external antenna, the shield must be placed on the right
adjacent terminal (F).
E
- Connector for antenna
H G F E
2. External pulse generator
F
- Connector for external impulse generator (accessories, e.g. key
switch or code keypad)
H G F E
key
selector