Allmand Night Lite Pro SE Power V Series, Owner'S Manual

Page: 47 / 106

47
6/9/2011
MAINTENANCE
HYDRAULIC PUMP
Hydraulic Oil Specifications
Adding Hydraulic Oil
Fill the reservoir with automatic transmission fluid
or any clean hydraulic fluid having a viscosity in-
dex that is suitable for the climate conditions in
which the unit will be operated. Standard units
are supplied with automatic transmission fluid
(ATF), and arctic units are supplied with aviation
hydraulic fluid (
see Figure 31 ).
Figure 31
Figure 32
The Safety messages that follow have
WARNING level Electrocution Hazards.

Only qualified electricians should ser-
vice or perform replacement proce-
dures. Ballast and capacitors are capa-
ble of discharging high voltage. Always
use appropriate personal safety cloth-
ing and gear when servicing electrical
components.

High voltage is present when engine is
running. Never attempt to service elec-
trical components while engine is run-
ning.

Do not operate the light tower if the in-
sulation on the electrical wiring is cut
or worn, or if bare wires are exposed.
Repair or replace damaged wiring be-
fore starting the engine.
1. Lamp Ballast
2. Capacitors