Allied NeXGen Installation And Startup Manual Download Page 77 | Manualshive

Page: 77 / 77

Allied NeXGen Installation And Startup Manual Download Page 77

NeXGen



Wayne Direct - Gilbarco / Installation and Start Up Guide

Copyright



2019 by Allied Electronics, Inc.

December 31, 2019

Page

3-52

3.6.3 Fuel Price Signs

The NeXGen controller supports the Future Media Display (FMD) protocol. The use of the
FMD electronic price sign is configurable and can be mapped to an available serial RS232
port via the Allied Diagnostic (ANDI_DGS) utility.

For specific versions available with support for the FMD protocol, please visit the Allied
Electronics, Inc. website and review the release notes for the system in question. The
release notes can be found at the link noted below:

http://www.alliedelectronics.com/Software_Release_Not

The following signs communicate with the NeXGen controller via the use of the ANDI protocol
message set. These devices physically connect to an available POS RS232 for
communications.



PWM



Daktronics



Skyline



Sunshine

The controllers noted above may have specific software version requirements for the support
of the ANDI protocol interface. Please contact the respective manufacturer for specific
details.

Other sign integrations are currently under development. Please contact Allied Electronics,
Inc. for up to date details regarding other possible signs that have integrated to the controller.

«
...
75
76
77

Summary of Contents for NeXGen














































































Reviews:

No comments