NeXGen
Wayne Direct - Gilbarco / Installation and Start Up Guide
Copyright
2019 by Allied Electronics, Inc.
December 31, 2019
Page
3-13
Model 3 + 1 Variable Blender
The table below lists the proper product to position assignment for each blender type which is
set via the POS
fueling point configuration menu.
The
blender type
setting is not used and should be set to zero (0).
Position
Advantage
Product
Adv. w/optimized & Encore
Product
1
Low grade
Low grade
2
Not assigned
Blended product
3
Blended product
High grade
4
Not assigned
Not assigned
5
High grade
Not assigned
6
Diesel
Diesel
7
Not assigned
Not assigned
8
Not assigned
Not assigned
* The low grade and the high grade products may be switched depending on the
position of the dispenser and the installation of the product lines.
Product to Position Mapping Fixed Blenders (Advantage and
Optimized
)
A Gilbarco fixed blender does not require any special product mapping. The table below lists
the proper product to position assignment for this blender type and is programmed via the
POS
fueling point configuration menu.
The
blender type
setting is not used and should be set to zero (0).
Position
Product
1
Low grade
2
Blended product
3
High grade
4
Not assigned
5
Not assigned
6
Not assigned
7
Not assigned
8
Not assigned
* The low grade and the high grade products may be switched depending on the
position of the dispenser and the installation of the product lines.