Allied NeXGen, Installation And Startup Manual, Page: 21 / 77

NeXGen

Wayne Direct - Gilbarco / Installation and Start Up Guide
Copyright

2019 by Allied Electronics, Inc.
December 31, 2019 Page
2-13
2.3.7 Car Wash Communication
The NeXGen controller uses channel 3 to interface to the car wash controller. Six
different car wash controller pinouts are listed in the section below:
 Ryko Code-A-Wash III

Ryko Code-A-Wash IV (S/N less than 166600)

Ryko Code-A-Wash IV (S/N 166600 or greater)
 Unitec POS 4000
 Unitec Portal Ti

Unitec Enterlink

Unitec Smart terminal

Kesseltronics Standard

Kesseltronics Advanced dual bay w/DB9 connection

Kesseltronics Advanced dual bay w/RJ45 connection
2.3.7.1 Ryko III and Kesseltronics Standard
NeXGen (CH 3) RJ45 adapter to the Ryko Code A Wash III and Kesseltronics Standard
(Part #N9348-ADP)
NeXGen
RJ45
Pins
CAT 5 Cable
(T568B Spec.)
RJ45
Adapter
Pins
Car Wash
DB9 Male
Pins
RXD 3 -------------- Wht/Grn -------------- 3 (Blk) 9 TXD
TXD 5 -------------- Wht/Blu -------------- 5 (Grn) 8 RXD
GND 8 -------------- Brown -------------- 8 (Wht) 7 GND
1 CTS
4 DCD
2.3.7.2 Ryko IV (S/N less than 166600), Unitec POS 4000, Portal Ti, Exacta, & DRB
NeXGen RJ45 adapter to the Ryko Code A Wash IV, Unitec POS 4000, Portal Ti, Exacta & DRB
(Part #N9344-ADP)
NeXGen
RJ45
Pins
CAT 5 Cable
(T568B Spec.)
RJ45
Adapter
Pins
Car Wash
DB9 Female
Pins
RXD 3 -------------- Wht/Grn -------------- 3 (Blk) 3 TXD
RTS 4 -------------- Blue -------------- 4 (Red) 8 CTS
TXD 5 --------------
Wht/Blu
--------------
5 (Grn)
2 RXD
DTR 7 -------------- Wht/Brn -------------- 7 (Brn) 6 DSR
GND 8 -------------- Brown -------------- 8 (Wht) 5 GND