11
Startup display
Display at the time of start-
up with software release
and device model.
Maintenance service
If the maintenance interval
for the device has been
reached, “Maintenance
Servicing” will appear after
the startup display. The dis-
play disappears automat-
ically after 10 seconds or
can be confirmed by press-
ing «
e-Drive»
. You must
take the device to your ser-
vice center.
Start display
All setpoint and actual val-
ues are displayed in the
start display. The heating
is not yet switched on. All
setpoint values can be set.
Welding startup display
Display during the heating
process.
Recipe selection
Select a recipe that you
have defined. The process
of selecting a recipe is
described in detail in the
Chapter “Load recipes”.
Setting
In the basic setting, you
can save recipes and ac-
cess the standby function
and transmission ratio via
the “Setup” menu. Select
“Advanced Mode” to ac-
cess a range of other set-
tings options.
Freely definable recipes
The process of saving
freely definable recipes is
described in detail in the
Chapter “Save recipe”.
