20
If the
drive is switched on,
then the temperature and speed welding parameters in the
working display (34)
are
set as follows:
• The
speed working display (34)
is blocked during welding.
• Briefly pressing the
«e-Drive»
enables the speed setting and the speed can be modified by rotating the
«e-Drive»
.
• The speed is blocked after 5 seconds or by pressing the
«e-Drive»
.
• The speed can no longer be adjusted.
• The
“Down” arrow key (28)
can be used to set the cursor to the heating working display and the temperature
setpoint can be modified by rotating the
«e-Drive»
. The set value is applied immediately.
Speed blocked
Speed unblocked
Speed blocked
8.3 Setting the speed and temperature during welding
