33
• Disconnect the device from the mains for maintenance work.
Allowing
welding wedge (5)
to cool down.
• Clean welding wedge with brass brush
• Clean drive rollers with wire brush.
• Check the
power supply cord (1)
and plug for electrical and mechanical damage.
• Only Leister accessories may be used.
• Leister Technologies AG and its authorized service points offer welding courses and introductory training classes.
Information at www.leister.com.
• Repairs shall be assigned exclusively to authorized Leister Service Centers. These guarantee a professional and
reliable repair service within 24 hours with original spare parts in accordance with circuit
diagrams and spare parts lists.
• If the display “Maintenance servicing” appears after the wedge welder device is switched
on, the wedge welder should be checked by an authorized Leister service center.
The drive unit has reached 800 operating hours.
• The display disappears automatically after 10 seconds or can be confirmed by pressing
«e-Drive»
.
18. Service and repair
17. Maintenance
15. Accessories
16. Training course
Risk of burning!
Do not touch the welding wedge when it is hot.
Allow the device to cool down.
