Prosilica GE Technical Manual V2.0.4
37
Camera dimensions
C-Mount flange focal distance
Flange focal distance is the optical distance from the mounting flange to image
sensor die. Prosilica GE C-Mount cameras are optically calibrated to a standard
17.526 mm optical flange focal distance, with a ±10 μm tolerance.
Adjustment of C-Mount
The C-Mount is adjusted at the factory and should not require adjusting. If for
some reason the lens mount requires adjustment, use the following method.
Loosen locking ring
Use an adjustable wrench to loosen the locking ring. Be careful not to scratch
the camera. When the locking ring is loose, unthread the ring a few turns from
the camera face.
www
Prosilica GE cameras are shipped with adjustable C-Mount. The
camera can also be built with a CS-Mount with a standard 12.50
mm optical flange focal distance and a ± 10 μm tolerance.
See
AVT Modular Concept
for more information:
http://www.alliedvisiontec.com/us/support/downloads/
product-literature/avt-modular-concept.html
Figure 25: Prosilica GE C-Mount camera and locking wrench
Note
A wrench suitable for this procedure is available for purchase
from AVT.
AVT P/N: 02-5003A
LOCKING WRENCH
LOCKING RING
C-MOUNT RING