Allied Solar Pty Ltd
10
P-MAN-01-1a_Rev B
Installation, Operation and Maintenance Manual – AS-2560
If you are using your own panels then
label the panels and wires
according to the appropriate figure
for 4 or 6 panels. Label the panels clearly before mounting them – It will make the wiring on the roof
much easier.
Install the framing and panels according to the Titan Solar – Solar Roof Mounting System.
o
Assemble the PV rails using the spice plates provided and finalise the position of the panels
on the roof. For the 6 panel kit each rail consists of 3 x 2.1m lengths and two splice plates.
o
Mark the alignment of the battens under the tin using a string line or chalk line following the
line of existing roof screws.
o
Install the Aluminium Tin Roof L feet using the new roof screws and in new positions along
the roof batten (don’t remove any existing roof bolts). Place the L feet / hooks 500mm from
each end and approx. 1100mm apart (maximum 1200 apart). Use a string line to ensure the
L feet are in a straight line and the screws penetrate the purlin securely.
o
Install the grounding clips under the panels at each mid clamp along one of the rails.
Figure 4-1 Panel Labelling Guide – 4 panels
Figure 4-2 Panel Labelling Guide - 6 Panels