Specifications
76
Manta Technical Manual V7.7.0
Opto-isolated I/Os
2 inputs, 2 outputs
RS232
1 TxD, 1 RxD
Voltage requirements
8 to 30 VDC; PoE
Power consumption
2.8 W @ 12 VDC; 3.3 W PoE
Trigger latency
3
Pixel format
Value
Mono8, Mono12Packed, BayerRG8,
BayerRG12, BayerRG12Packed,
YUV411Packed
42 µs
Mono12, BayerRG12, YUV422Packed
55.14 µs
RGB8Packed, BGR8Packed,
YUV444Packed
84 µs
Trigger jitter
3
Pixel format
Value
Mono8, Mono12Packed, BayerRG8,
BayerRG12, BayerRG12Packed,
YUV411Packed
7 µs
Mono12, BayerRG12, YUV422Packed
9.2 µs
RGB8Packed, BGR8Packed,
YUV444Packed
14 µs
Operating temperature
+5°C to +45°C ambient temperature (without condensation)
Storage temperature
-10°C to +70°C ambient temperature (without condensation)
Body dimensions (L x W x H)
86.4 x 44 x 29
mm
Mass (typical)
PoE model: 200 g; Non-PoE model: 190 g
Interface
IEEE 802.3 1000BASE-T (Gigabit Ethernet), IEEE 802.3af (PoE)
Interface standard
GigE Vision Standard V1.2
Camera control standard
GenICam SFNC V1.2.1 compliant
Regulations
CE, RoHS, REACH, WEEE, FCC, ICES
Temperature monitoring
Available for main board only.
Resolution 0.031; Accuracy ±1 °C
1
For more information on available optical filters see the
Modular Concept.
2
For more information on
StreamFrameRateConstrain
,
GigE Features Reference
.
3
These values are calculated directly from the microcontroller source. These values are only valid for pixel formats
< 16-bit per pixel and applicable in both Idle and Frame valid states:
•
Idle state: sensor is ready and camera is idle, waiting for the next trigger
•
Frame valid state: sensor is reading out and camera is busy. If the next frame is requested by an external
trigger in this state, higher latency may occur as compared to the idle state.
Feature
Specification
Manta G-235B
Manta G-235C
Table 23: Manta G-235B, G-235C model specifications (continued)