Camera interfaces
176
Manta Technical Manual V7.7.0
Video iris output description
Manta cameras provide built-in video type auto-iris controls.
Damage to the lens
The following schematic uses Camera POWER to power the video iris lens and
assumes Camera POWER = 12 V. Most video iris lenses operate at a 8 to 16 V input
voltage. Therefore, this circuit is not appropriate if using a 24 V camera power
supply. Doing so may irreparably damage your lens. Consult your video iris lens
specifications for the appropriate drive voltage.
Figure 105: Video iris schematic
12 V Power
Camera GND
Camera POWER
Camera GND
1
2
3
4
Video Signal
Lens Power
Lens Ground
1
2
3
4
5
6
7
8
9
10
12
Hirose HR10A-10P-12S
1
2
3
4
5
6
7
8
9
10
11
12
Cable Side
11