GC1020 Technical Manual
Page 13
o
Select the
Internet Protocol (TCP/IP)
check box and then select
Properties
. See
Figure 6.
Network card TCP/IP address.
. Select the
Use the following IP address
and enter an IP
address of
169. 254. x. y
, where
x
and
y
can be any number. Press the TAB key after entering
the IP address and the subnet mask will automatically be entered. The subnet mask is
255.
255. 0. 0
. Click
OK
to save changes. Note that if Windows reports a conflict with the above IP
address, simply repeat the above steps and change the last digit of the IP address to a different
value.
Figure 6. Network card TCP/IP address.
