Allied Telesis x330-10GTX, Installation Manual

Page: 27 / 98

x330-10GTX Gigabit Ethernet Switch Installation Guide
27
Table 4 describes the duplex mode LEDs on the 10/100/1000Mbps
Ethernet copper ports.
1/2.5/5/10Gbps
Ethernet Copper
Port LEDs
The 1/2.5/5/10Gbps copper port has two LEDs that display link/activity and
speed information. The LEDs are shown in Figure 4.
Figure 4. Link/Activity LEDs on the 1/2.5/5/10Gbps Copper Port
Off Possible causes of this state are listed
here:
- The port has not established a link with
another network device.
- The LEDs are turned off. To turn on the
LEDs, use the eco-friendly button.
Table 4. Duplex Mode LEDs on the 10/100/1000Mbps Copper Ports
State Description
Solid Green The port is operating in full duplex mode.
Solid Amber The port is operating in half duplex mode.
Flashing Amber The port is operating in half duplex mode,
with collisions.
Off Possible causes of this state are listed
here:
- The port has not established a link with
another network device.
- The LEDs are turned off. To turn on the
LEDs, use the eco-friendly button.
Table 3. Link/Activity LEDs on the 10/100/1000Mbps Copper Ports
State Description
2.5/5/10Gbps LED
1000Mbps LED