x310 Series Installation Guide for Stand-alone Switches
61
3. Turn the switch over.
4. Attach the two rack mount brackets to the sides of the switch with the
eight bracket screws that come with the unit.
The AT-x310-26FT Switch comes with one short bracket and one long
bracket. When installing the device in an equipment rack, Allied Telesis
recommends installing the short bracket on the right side and the long
bracket on the left side, as you face the front of the unit, so that the
stacking ports on the unit align with the same ports on other x310
Series switches in the equipment rack. The possible positions of the
brackets are shown in Figure 19.
Figure 19. Installing Brackets on the AT-x310-26FT Switch
The bracket positions for the AT-x310-26FP, AT-x310-50FT, and AT-
x310-50FP Switches are shown in Figure 20 on page 62 and Figure 21
on page 63.
Summary of Contents for AT-x310-26FP
