Chapter 3 - Administration
Administration Manual (H.323 Version)
AT-VP504E FXO
47
Assume End of
Dialing After n
digits
Number of digits after which the call is processed.
Make sure that this number properly matches the
number of digits in the call number.
Notes:
•
This rule applies only to telephone
numbers (E.164 aliases). It does not
apply to IP addresses.
•
This option is not used if the Initiator
value is Automatic.
Value: Any number between 1 and 20
Default Value: 20
Assume End of
Dialing After n
seconds
Time, in seconds, to wait after the last digit is dialed
before processing the call.
Notes:
•
This rule applies to telephone numbers
(E.164 aliases) and IP addresses.
•
This option is not used if the Initiator
value is Automatic.
Default Value: 5 seconds
DTMF Tone
Detection Duration
Time length defined to detect incoming DTMFs.
Shorter the detection duration, higher are error risks.
Longer the detection duration, higher are the risks of
missing a DTMF.
Value: Any number of milliseconds between 40 and
150.
Default Value: 40 ms
Table 19: FXO Ports PSTN to IP Network Settings (Continued)
Parameter
Definition
Summary of Contents for AT-VP504E FXS
