Allied Telesis AT-TQ6602, Installation Manual, Page: 39 / 108

TQ6602 Wireless Access Point Installation Guide
39
Warning
This equipment shall be installed in a Restricted Access location.

E45
Warning
FCC Caution: Any changes or modifications not expressly approved
by the party responsible for compliance could void the user's
authority to operate this equipment.

E80
Note
The access point must be powered by:
1. A UL listed external AC/DC power supply suitable for use at
Tma 50
o
C, a maximum operating altitude of 3000 m or higher, and
whose output meets separated extra-low voltage (SELV), limited
power sources (LPSs) and is rated 12 VDC, 4.0 A, Refer to
Table 5, “External AC/DC Power Adapter Specifications” on page
70.
OR
2. By Power over Ethernet through a UL listed ITE.
Caution
Air vents must not be blocked and must have free access to the
room ambient air for cooling.

E6
Warning
An operational unit can be hot. Exercise caution when handling with
unprotected hands.

E125
Warning
Hot Surface! The finned surface on the back of the chassis is a heat
sink that can become dangerously hot exceeding 70°C (158° F)

E114.
Warning
Operating Temperature. This product is designed for a maximum
ambient temperature of 50°C (122° F)

E7.