Port Configuration
22
Neg
The status of Auto-negotiation on the port. Possible settings are Auto
and Manual. Auto indicates that the port is using Auto-negotiation to set
operating speed and duplex mode. Manual indicates that the operating
speed and duplex mode have been set manually.
Spd
The operating speed of the port. Possible values are 10; indicating the
port is operating at 10 Mbps, and 100; indicating the port is operating at
100 Mbps.
Dplx
The duplex mode of the port. Possible settings are half-duplex and full-
duplex. Half-duplex indicates that the port is operating at half-duplex
mode. Full-duplex indicates that the port is operating at full-duplex
mode.
Flow
The flow control setting for the port. Flow control allows the port to
decrease the frequency in which it is sending frames to the receiving
end-node, if frames are being sent to fast. It will also send flow control
frames to a transmitting end-node to request that the port slow its
speed of transmission. Possible settings are Enabled (ON) or Disabled
(NONE).
State
The current operating status of the port. Possible values are Enabled and
Disabled. Enabled indicates the port is sending and receiving Ethernet
frames. Disabled indicates the port has been manually disabled.
