AT-S67 and AT-S68 User’s Guide
13
Starting a Local Management Session
The AT-FS7016 and AT-FS7024 Smart Switches features a RS-232
Terminal Port. You can access the HyperTerminal interface through the
RS-232 port on the front of the switch.
Note
A switch does not need an IP address to be managed from a local
management session. You can start a session at any time on either
an AT-FS7016 or AT-FS7024 Smart Switch in your network. Running
a local management session does not interfere with the flow of
Ethernet traffic through the unit.
Starting a Local
Management
Session
To start a local management session, perform the following procedure:
1. Connect one end of a straight-through RS-232 cable with a DB-9
connector to the RS-232 Terminal Port on the switch. Refer to Figure
1.
Figure 1 Connecting the RS-232 Cable to the RS-2332 Terminal Port
2. Connect the other end of the cable to the RS-232 port on a terminal
or PC with a terminal emulator program.
3. Configure the terminal or terminal emulator program as follow:
Baud per second: 9600
Data bits: 8
Stop bits: 1
Flow control: None
RS-232
TERMIN
AL PORT
1
2
3
4
5
6
7
8
9
10
11
12
POWER
LINK/ACT
100M
FDX
AT-FS701
6
16 Port Fast Ethernet Smart Switch
13
14
15
16
