AT-RPS3000 Redundant Power Supply Installation Guide
17
Power Supply
Slots
The slots on the back panel of the chassis are for two power supply
modules. The slots are labeled A and B.
Figure 2. Slots A and B for the Power Supply Modules
Note
The chassis is shipped from the factory with a blank panel over the
power supply slots.
RPS Connectors
The four RPS connectors, which connect the chassis to up to four x610
Series switches, are paired with the power supply slots. RPS 1 and 2 ports
receive power from the power supply module in slot A.
Figure 3. Slot A and RPS 1 and 2 Ports
Slot A
Slot B
2166
B
B
1
2
3
4
SYSTEM
PoE+ / SYSTEM
PoE+ / SYSTEM
SYSTEM
MODULE B
MODULE A
A
A
Slot A
RPS 1 and 2 ports
2166
B
B
1
2
3
4
SYSTEM
PoE+ / SYSTEM
PoE+ / SYSTEM
SYSTEM
MODULE B
MODULE A
A
A
Summary of Contents for AT-PWR1200
Page 10: ...Tables 10...
Page 82: ...Chapter 3 Removing Power Supply Modules 82...
Page 86: ...Chapter 4 Troubleshooting 86...
