manualshive.com logo in svg

Allied Telesis AT-GS950/24, User Manual

The Allied Telesis AT-GS950/24 is a high-performance network switch designed for businesses. To ensure seamless setup and configuration, a comprehensive User Manual has been provided. You can effortlessly download the manual for free from our website, manualshive.com, to maximize the full potential of this remarkable product.

Share
Download
background image

AT-GS950/24  Web Interface User Guide

193

Out-Profile Action

The Create Out-Profile Action page allows you to specify a Profile Action’s 

Permit

 or 

Deny

 privilege and bandwidth restrictions for packets in the 

egress queue.

You can create, modify or delete an Out-Profile Action by following the 
procedures in the following sections:

“Create Out-Profile Action,”  next

“Modify Out-Profile Action” on page 195

“Delete In-Profile Action” on page 192

Create Out-

Profile Action

To create a Out-Profile Action, perform the following procedure:

1. From the main menu on the left side of the page, select the 

Access 

Control Config 

folder.

The 

Access Control Config 

folder expands.

2. From the

 Access Control Config 

folder

, 

select

 Out-Profile Action

.

The Create Out-Profile Action page is displayed in Figure 68.

Figure 68. Create Out-Profile Action Page

3. Enter a number in the Out-Profile Action 

Index

 field.

The Index must be a unique number within the range of 1 - 65535. This 
field is mandatory.

Note

The Out-Profile Action 

Index

 is a required parameter when you 

create a Policy. See “Create Policy” on page 200 for more 
information.

Summary of Contents for AT-GS950/24















































































































































































































































































































































































Reviews:

No comments

Related manuals for AT-GS950/24

National Instruments NI 9871 Operating Instructions Manual preview
NI 9871
Brand: National Instruments Pages: 24
National Instruments NI 9478 Operating Instructions Manual preview
NI 9478
Brand: National Instruments Pages: 32
National Instruments FIELDPOINT FP-1600 Operating Instructions Manual preview
FIELDPOINT FP-1600
Brand: National Instruments Pages: 8
Watchguard XTM 5 Series Hardware Manual preview
XTM 5 Series
Brand: Watchguard Pages: 24
XAVI Technologies Corp. 7721r User Manual preview
7721r
Brand: XAVI Technologies Corp. Pages: 71
Tbus NV-ER1816i Installation Manual preview
NV-ER1816i
Brand: Tbus Pages: 25
Faderfox 4midiloop User Manual preview
4midiloop
Brand: Faderfox Pages: 10
HPE FlexNetwork 5130 Series Troubleshooting Manual preview
FlexNetwork 5130 Series
Brand: HPE Pages: 33
Unex EVK-351 Quick Start Manual preview
EVK-351
Brand: Unex Pages: 27
Ubiquiti PBE-M5-400-ISO Quick Start Manual preview
PBE-M5-400-ISO
Brand: Ubiquiti Pages: 28
ZyXEL Communications Prestige 2864I Getting Started preview
Prestige 2864I
Brand: ZyXEL Communications Pages: 8
Goobay 93122 User Manual preview
93122
Brand: Goobay Pages: 20
DELTA GROUP LOYTEC LIP‑3ECTC Installation Instructions preview
LOYTEC LIP‑3ECTC
Brand: DELTA GROUP Pages: 4
ZyXEL Communications XGS4600 Series User Manual preview
XGS4600 Series
Brand: ZyXEL Communications Pages: 645
Acard ARS-2212 User Manual preview
ARS-2212
Brand: Acard Pages: 43
Billion BiPAC 7500G Specifications preview
BiPAC 7500G
Brand: Billion Pages: 2
Lobaro wMBUS-LoRaWAN User Manual preview
wMBUS-LoRaWAN
Brand: Lobaro Pages: 26
Westermo MRD-315 User Manual preview
MRD-315
Brand: Westermo Pages: 34

Brands by name

Popular brands

Load more brands