manualshive.com logo in svg

Allied Telesis AT-GS950/24, User Manual

The Allied Telesis AT-GS950/24 is a high-performance network switch designed for businesses. To ensure seamless setup and configuration, a comprehensive User Manual has been provided. You can effortlessly download the manual for free from our website, manualshive.com, to maximize the full potential of this remarkable product.

Share
Download
background image

AT-GS950/24  Web Interface User Guide

35

DHCP Client Configuration

This procedure explains how to activate and deactivate the DHCP client 
on the AT-GS950/24 switch. When the client is activated, the switch 
obtains its IP configuration including an IP address and subnet mask from 
a DHCP server on your network. Before performing the procedure, note 
the following:

By default, the DHCP client is disabled on the switch. 

The DHCP client supports DHCP Auto Configuration Settings or 
BOOTP. See “DHCP Auto Configuration” on page 37 for more 
information.

After you enable DHCP, your current management session ends 
because a different IP address is assigned to the switch by the 
DHCP server. The new IP address can be discovered using the 
ATI Discovery Tool. See “DHCP and ATI Web Discovery Tool” on 
page 34 for more information.

To activate or deactivate the DHCP client on the switch, perform the 
following procedure:

1. From the main menu on the left side of the page, click the 

System 

folder.
The 

System 

folder expands.

2. From the 

System 

folder, select 

IP Setup

.

The IP Setup Page is shown in Figure 5 on page 26.

3. From the pull-down menu next to the 

DHCP Mode 

field, select 

Enable 

or 

Disable

.

4. Click 

Apply

.

When the DHCP client is 

Enabled

, the web server connection to the 

switch is lost because a different IP address is assigned to the switch 
by the DHCP server. 

Caution

Enabling DHCP may end your current management session. 

5. Use the ATI Web Discovery Tool to find the new IP address assigned 

to the switch by the DHCP server. See “DHCP and ATI Web Discovery 
Tool” on page 34 for more information.

Summary of Contents for AT-GS950/24















































































































































































































































































































































































Reviews:

No comments

Related manuals for AT-GS950/24

D-Link AirPlus DWL-810 Owner'S Manual preview
AirPlus DWL-810
Brand: D-Link Pages: 25
D-Linke DHP-346AV Quick Installation Manual preview
DHP-346AV
Brand: D-Linke Pages: 32
dixell XT120C Installing And Operating Insructions preview
XT120C
Brand: dixell Pages: 4
Allied Telesis AT-8000C Declaration Of Conformity preview
AT-8000C
Brand: Allied Telesis Pages: 1
Extron electronics PoleVault System A/V Source Inputs Specification Sheet preview
PoleVault System A/V Source Inputs
Brand: Extron electronics Pages: 4
ZyXEL Communications P-660W-T1 v2 User Manual preview
P-660W-T1 v2
Brand: ZyXEL Communications Pages: 244
B&B Electronics EIR208 Series Quick Start Manual preview
EIR208 Series
Brand: B&B Electronics Pages: 2
XtendLan XL-HCW224C User Manual preview
XL-HCW224C
Brand: XtendLan Pages: 52
Billion BiPAC 7301VGP User Manual preview
BiPAC 7301VGP
Brand: Billion Pages: 120
Swann NVRx-7300 series Quick Start Manual preview
NVRx-7300 series
Brand: Swann Pages: 9
Keysight Technologies U3024AH10 User'S And Service Manual preview
U3024AH10
Brand: Keysight Technologies Pages: 106
M-system M5XSBS Instruction Manual preview
M5XSBS
Brand: M-system Pages: 4
Kramer VS-162AVM User Manual preview
VS-162AVM
Brand: Kramer Pages: 56
Kasda KE318EU User Manual preview
KE318EU
Brand: Kasda Pages: 39
Perle IRG5540 Quick Start Manual preview
IRG5540
Brand: Perle Pages: 4
Hanwha Techwin WISENET XRN-1610 User Manual preview
WISENET XRN-1610
Brand: Hanwha Techwin Pages: 88
ADC 150-204-100-03 User Manual preview
150-204-100-03
Brand: ADC Pages: 29
WatchNet ENM-04 POE Quick Connection Manual preview
ENM-04 POE
Brand: WatchNet Pages: 2

Brands by name

Popular brands

Load more brands