manualshive.com logo in svg

Allied Telesis AT-GS950/24, User Manual

The Allied Telesis AT-GS950/24 is a high-performance network switch designed for businesses. To ensure seamless setup and configuration, a comprehensive User Manual has been provided. You can effortlessly download the manual for free from our website, manualshive.com, to maximize the full potential of this remarkable product.

Share
Download
background image

AT-GS950/24  Web Interface User Guide

247

Port Access

Control

Configuration

To configure port-based access control, perform the following procedure:

1. Select the 

Security 

folder from the main menu on the left side of the 

page.
The 

Security 

folder expands.

2. From the 

Security 

folder, select 

Port Access Control

. The Port 

Access Control Configuration Page is displayed. See Figure 89.

Figure 89. Port Access Control Configuration Page

3. Configure the following parameters as required:

NAS ID

 - This parameter assigns an 802.1x identifier to the switch 

that applies to all ports. The NAS ID can be up to sixteen 
characters. Valid characters are 0 to 9, a to z, and A to Z. Spaces 
are allowed. Specifying an NAS ID is optional.

Port Access Control

 - This parameter enables or disables Port 

Access Control. Select one of the following choices from the pull-
down menu:

Enable - 

The Port Access Control feature is activated.

Disable

 - The Port Access Control feature is de-activated.

Authentication Method 

- This parameter indicates the 

authentication method used by the switch. Select one of the 
following choices:

RADIUS

 - This parameter configures port security for remote 

authentication. After completing steps 4 - 6, you must configure 
the “RADIUS Client” on page 251.

Local

 - This parameter configures port security for local 

authentication.After completing steps 4 - 6, you must configure 
the parameters for “Dial-in User - Local Authentication” on 
page 254.

When you are finished configuring the parameters, click 

Apply

.

4. Click 

Settings

 to configure advanced configuration parameters.

Configure the following parameters as required:

Summary of Contents for AT-GS950/24















































































































































































































































































































































































Reviews:

No comments

Related manuals for AT-GS950/24

National Instruments SCXI-1121 User Manual preview
SCXI-1121
Brand: National Instruments Pages: 162
Quantum Scalar 50 Upgrade Instructions preview
Scalar 50
Brand: Quantum Pages: 20
Draytek Vigor 2710e Quick Start Manual preview
Vigor 2710e
Brand: Draytek Pages: 8
Jøtul ERS 01 Operation And Maintenance Manual preview
ERS 01
Brand: Jøtul Pages: 20
Kramer RK-10MT Quick Start Manual preview
RK-10MT
Brand: Kramer Pages: 2
TP-Link L-R480T+ User Manual preview
L-R480T+
Brand: TP-Link Pages: 131
Westermo Ibex-RT-330-HV User Manual preview
Ibex-RT-330-HV
Brand: Westermo Pages: 34
Comway 4G DTU Configuration Instructions preview
4G DTU
Brand: Comway Pages: 20
Planet VC-820M Quick Installation Manual preview
VC-820M
Brand: Planet Pages: 2
ZyXEL Communications XGS4600 Series User Manual preview
XGS4600 Series
Brand: ZyXEL Communications Pages: 645
LanReady AP-952X User Manual preview
AP-952X
Brand: LanReady Pages: 40
TP-Link Archer AX10000 Quick Installation Manual preview
Archer AX10000
Brand: TP-Link Pages: 2
Paradyne Application Module 9109 OCU-DP Installation Instructions Manual preview
Application Module 9109 OCU-DP
Brand: Paradyne Pages: 8
FiberHome AN5506-04 Series Product Manual preview
AN5506-04 Series
Brand: FiberHome Pages: 146
Digi Transport WR41-C Installation Manual preview
Transport WR41-C
Brand: Digi Pages: 7
Royal RPL-85 User Manual preview
RPL-85
Brand: Royal Pages: 6
D-Link DSL-X1852E User Manual preview
DSL-X1852E
Brand: D-Link Pages: 141
D-Link DSL-G624T Quick Installation Manual preview
DSL-G624T
Brand: D-Link Pages: 72

Brands by name

Popular brands

Load more brands