FS710 Series Ehternet Switch Installation Guide
39
12. Verify that the switch chassis is securely mounted onto the wall.
a. If the switch is loose against the wall, dismount the switch off the
wall and tighten the screws 1/4-turn. Repeat steps 7 - 12 until the
switch chassis is securely fastened to the wall.
b. If the mounting key-holes on the bottom of the switch chassis
cannot completely slide over the screw heads on the wall, then
loosen the screws 1/4-turn and repeat steps 7 - 12 until the switch
chassis is securely fastened to the wall.
13. Proceed to “Cabling the Switch” on page 60 for the cable installation.
