26
26
Wall and Rack
Mount Bracket
Summary
The FS710 Series switch can be mounted on a table top, on a wall or in a
19” rack. No additional hardware is required for installing the unit on a
table top. If you plan on mounting the unit on a wall or in a rack, Table 3
shows brackets options available.
Ethernet Cable
Specifications
Table 4 contains the cabling specifications for the twisted pair ports.
Note
The twisted pair ports on the switch feature Auto-MDI. Each port is
individually configured as MDI or MDI-X when connected to an end-
node. Consequently, you can use a straight-through twisted pair
cable when connecting any network device to a twisted pair port on
the switch. A port operating at 10 or 100 Mbps uses four of the eight
strands in twisted pair wiring. See Table 15 and Table 16 on
page 64 for more information.
Table 3. Wall and Rack Mount Brackets
Model
Wall Mount
Rack Mount
AT-FS710/5
and /5E
Use wall mounting holes
on bottom of chassis.
These models are not rack
mountable.
AT-FS710/8
and /8E
Use AT-BRKT-J23 wall
mount kit.
NOTE: This kit must be
ordered separately.
AT-RKMT-J08 19” rack
mount kit.
NOTE: This kit must be
ordered separately.
AT-FS710/16
and /16E
Use AT-BRKT-J22 wall
mount kit.
NOTE: This kit must be
ordered separately.
Rack *2pcs+screw (to
device)*4pcs
AT-FS710/24
Use AT-BRKT-J22 wall
mount kit.
NOTE: This kit must be
ordered separately.
Rack *2pcs+screw (to
device)*4pcs
Table 4. Twisted Pair Cabling and Distances
Speed
Type of Cable
Maximum Operating
Distance
10 Mbps
Category 3 or better unshielded
twisted pair cable
100 m (328 ft)
100 Mbps
Category 5 or unshielded
twisted pair cable
100 m (328 ft)
