Ethernet Administration
36
Update Software In Another System
There are two prerequisites before you can update software to another
system:
1.
Software cannot be upgraded if either an AT-S13 PCMCIA card or an
AT-S16 Firmware Cassette is installed in the remote device, and
2.
All systems must have the same downloaded password.
Return to the
System Administration
submenu.
Enter the letter
U
for
Update software in another system.
The
following submenu will be displayed.
Next, you are prompted to select a specific switch to download with new
software.
E
nter the IP address of the target switch, the target switch name (if
configured), or the target switch’s MAC address. The MAC address can be
obtained from the
Diagnostics
screen. It may also be found on an external
label above the RS232 port (or the console port, in some instances).
