Operations Manual
31
Enter the letter
E
for
Ethernet parameters
to access the following
submenu:
NOTE
All changes to Ethernet parameters require a system reset to be activated.
Your switch offers the choice of store-and-forward (the default) or
cut-through switching strategies. In store-and-forward, the switch stores the
entire packet before it is forwarded.
The
Ethernet parameters
screen shows the current choices for
forwarding and for LED modes of operation. At the bottom you see a list of
menu options. Each currently configured choice is highlighted with an
arrowhead (“>”).
Enter the letter
S
or the letters
CU
if you wish to change the forwarding
mode. Enter the letter
T
or the letters
CO
if you wish to change the LED
mode.
