Ethernet Administration
24
Some of the submenus cannot fit on a single screen. In this case follow the
instructions on the screen to obtain additional information or to go to the next
page.
AT-S13 Port
Status Screen
Choose the AT-S13
Port Status
submenu by entering the letter
P
. The
system will then display the screen shown below.
This screen shows the status and configuration of each Ethernet port. At the
top of the screen, you see the system name (if any). Each port is identified by
number and name (if any). Note that the port name can be user-determined
through the
Port Configuration
screen which is discussed later.
The columns provide the following information:
Port.
The
Port
column shows each port number and its user-assigned
name, if any.
Link.
The
Link
column shows the status of each port’s Link Integrity Test:
either
Online
or
Offline
.
Online
indicates that IEEE 10Base-T standard Link Integrity
pulses have been detected on this port.
Offline
indicates that Link Integrity pulses have not been detected.
Either the device is not operational (powered down, etc.), or there is a
physical problem with the wiring.
“- -” indicates that Link Integrity Tests are not to be performed on
this port — Link Test has been turned OFF by the management
agent.
