Allied Telesis AT-2711FX, Installation And User Manual, Page: 84 / 180

Installing the NetWare Driver Software
84
FRAME=
This is a Novell NetWare keyword.
String specifying the frame type.
Choices are:
ETHERNET_II
ETHERNET_802.3
ETHERNET_802.2
ETHERNET_SNAP
Default value is ETHERNET_802.2
SLOT=
This is a Novell NetWare keyword.
System-wide unique Hardware Instance Number (HIN) that
may be the physical slot number on a slot based bus such
as PCI.
SLOT=n
Jumbo=
Keyword to enable Jumbo frame support. When enabled,
jumbo packets of up to 9000 bytes are supported.
Choices are:
Jumbo=1536-9100
Default is no jumbo packets
Note
Jumbo frames are only supported on NetWare 6.0 and above. Plus
the first frame loaded must be ETHERNET_II
Note
Jumbo frame support must have the following text in the Startup.ncf
file: "Set maximum physical receive packet size = 18000".
P3=
This keyword is used when running perform3.exe tests and
may increase performance on networks running with many
ipx clients.
Set P3=1, when running the perform3 test back to back to
a single client.
Set P3=2, when running the perform3 test with many
clients.
Default: P3=0.
Spuriousfix=
When this keyword is set to 1 (spurious fix is on), the
spurious interrupts count that is sometimes displayed on
the NetWare console monitor, may be reduced. By setting
this keyword to 0 (spurious fix is OFF), performance of
the driver may be enhanced.