Allied Telesis AT-2711FX, Installation And User Manual, Page: 145 / 180

Advanced Control Suite User’s Guide
145
counter is incremented when the result of a transmission is reported as
Transmit OK and the attempt value is 2.
ˆ
Frames Tx with more than one Collision . A count of frames that are
involved in more than one collision and are subsequently transmitted
successfully. This counter is incremented when the transmit status is
reported as
Transmit OK , and the value of the attempts variable is
greater than 2 and less or equal to the attempt limit.
ˆ
Frames Tx after Deferral . A count of frames whose transmission was
delayed on the first attempt because the medium was busy. The
frames involved in any collision are not counted.
Custom Statistics
Definitions of the custom statistics parameters are provided below.
Note
Custom statistics are available only for an enabled adapter.
ˆ
Frames size less than 64-byte with bad FCS . The number of frames
with a size less than 64 bytes with bad FCS.
ˆ
MAC Rx w/ Pause Command and Length = 0 . MAC control frames
with the pause command and a length equal to 0.
ˆ
MAC Rx w/ Pause Command and Length greater than 0 . MAC
control frames with the pause command and a length greater than 0.
ˆ
MAC Rx w/ no Pause Command . MAC control frames with no pause
command.
ˆ
MAC Sent X-on . MAC Transmit with X-on was on.
ˆ
MAC Sent X-off . MAC Transmit with X-on was off.
ˆ
Large Send Offload Transmit Request - MAC Transmit with Large
Send Offload.