Allied Telesis AT-2711FX, Installation And User Manual, Page: 130 / 180

Chapter 11: Broadcom Advanced Control Suite 2 (BACS 2) Applications
130
Installing the BACS 2 Application
You can install the BACS 2 software through the GUI or by using the silent
install option. See the following procedures:
ˆ
“Installing and Using the GUI,” next
ˆ
“Using Silent Installation” on page 130
Note
Before installing the BACS 2 software on a computer running
Windows 2000 Advanced Server with Terminal Services, type
change user /install from the DOS command prompt.
Installing and
Using the GUI
To install the BACS 2 application using the GUI (graphical user interface),
perform the following procedure.
Note
Before you begin the installation, close all applications, windows,
and dialog boxes
4. Double-click setup.exe in the appropriate directory (IA32 or x64).
5. Click Next in Broadcom Management Programs Setup .
6. Read the license agreement and click Yes .
7. In Select Components , click the component you want to install:
ˆ
Control Suite . Installs the Broadcom Advanced Server Control
Suite.
8. Follow the on-screen instructions.
You can start the Control Suite from the Control Panel by double-clicking
Broadcom Control Suite 2 . Or, click Start , point to Programs , point to
Broadcom , and then click the Broadcom Advanced Control Suite 2 .
Using Silent
Installation
The recommended installation procedure is to copy the installation files to
your hard disk before you run the silent install because the
setup /s
command automatically generates a Setup.log file in the directory where it
is run.
Note
Before you begin the installation, close all applications, windows,
and dialog boxes.