Allied Systems Allied H6G Series, Service Manual

Page: 81 / 122

Section 4
4 - 21
Motor Disassembly
NOTE: Disassembling the motor while it’s still under
its warranty period immediately invalidates the war-
ranty. If the motor malfunctions before its warranty
period expires, please contact Allied Systems Com-
pany fi rst before attempting to repair it.
1. Remove snap ring.
Use caution when removing snap ring. If re-
leased accidentally, it can become an airborne
hazard.
2. Pry out shaft seal plate with two screwdrivers. Remove
seal plate O-ring from groove in bearing bore.
3. Mark one side of the motor for proper assembly, paying
careful attention that the cartridge will not be installed
upside down. Secure the motor prior to loosening the
5/8-11 bolts.
4. Remove front housing. NOTE: Two 5/16” ball checks
and one main body O-ring may be dislodged and
fall free.
5. With the seal plate removed, press shaft and ball
bearing out of front housing.