30
70291301
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Troubleshooting
7. Use screwdriver to remove spring from center
tab. Refer to
Figure 5
.
8. Lift spring, with attached clip, off drop.
9. Remove clip from spring. Refer to
Figure 6
.
10. Attach clip to new tension spring, Part No. 209/
00598/02.
11. Place clip, installed on spring, in slot on coin
drop. Refer to
Figure 7
.
12. Use a small flathead screwdriver to push spring
under center tab. Refer to
Figure 8
.
13. Lift spring gently to place in position under left
tab.
14. Push spring to right until it snaps into position.
Refer to
Figure 4
.
15. Close coin drop cover.
16. Move tension spring over cover catch. Refer to
Figure 3
.
Reinstall Coin Drop Into Machine
1. Reinstall coin drop into machine.
2. Reconnect electrical power to machine and drop.
3. Add a coin to drop to verify that coin drop is
operating properly and that electrical connection
is working properly.
Figure 6
Figure 7
MIX4B
Clip
MIX8B
Slot
Figure 8
MIX5B
Small Flat
Screwdriver
Center
Tab
Left Tab