© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
122
11-06-150R8
Network Setup –Getting Started (Continued)
3. Scan the Network for Machines
Under the
Tools
menu, click
Scan for Machines
.
NOTE: The scan speed can be adjusted. From the expanded network controller window, under
the
Settings
tab, change the number listed in the
Node scan end:
textbox to show the number of
machines in the network. For example, if there are 36 machines in the network, change the
number to 36.
Figure 6
4. If Necessary, Rename the Machines
When the scan is complete, the machines in the network will be assigned to an unknown location.
NOTE: By default, the machines are named with the machine’s serial number and node
number.
NOTE: If the machines in the network are not listed in the unknown location, check the
network kits and controls on the missing machines to make sure they are working properly.
Figure 7
a. Assign the machines to the desired location.
i.
If necessary, create a location for the machines. Refer to the
Adding a Market, Branch
or Location
section for details.
ii.
In the tree structure, click
Unknown Location
. The list of machines in the network is
displayed.
iii. Click and drag to highlight all of the machines in the network.
iv. Click the machines and drag them into the desired location listed in the tree structure.
The machines in the network are moved to the selected location.
Unknown Market
Branch
and
Unknown Location
disappear from the tree structure.
PHM1514R
PHM1515R
