© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
1800000
24
Maintenance
General Maintenance
IMPORTANT: The maintenance should be done
according to the maintenance plan. The
manufacturer is not responsible for accidents or
defects due to bad maintenance or use of spare
parts not delivered from factory.
The possible risks of bad maintenance are:
●
Quick wear of bearings and gears by insufficient
greasing.
●
Heating of the bearings by insufficient greasing
can lead to fire.
●
If safety devices are not checked daily, it can lead
to severe accidents.
●
Waiting too long to renew the padding can
damage the beds.
●
Dust on the machine can lead to fire.
●
Worn or missing feed bands can cause a danger
for trapped fingers or feeder linens.
Daily:
●
2 to 4 times a day pass a wax cloth through
ironer.
●
Check condition of padding.
Every Three Months:
●
Clean ventilation caps of drive reduction motor
and suction fan.
●
Grease bearings with 1-2 pumps of high
temperature grease.
Every Six Months:
Check chain tension of feed bands.
Yearly:
Change reduction drive roll oil.
Every 2 Years:
Drain ironing bed oil.
Every 5 Years:
Drain and replace hydraulic pump oil.
Other:
If scale occurs at entrance of beds, clean beds.
Oil Change Maintenance
Reduction Drive Roll
Ironing Bed
Thermal Oil
Hydraulic Pump
Oil Type
GOYA 220
TEXATHERM HT22
SHELL TELLUS S 68
Maintenance
First drain after 6
months then every year
Every 2 years
Drain every 5 years
Oil Volume
1.2 liter (0.3 gallons)
Gas Models
70 liter (18.5 gallons)
Electric Models
120 liters (32 gallons)
2.5 liter (0.7 gallons)
Table 10
Summary of Contents for UL24A118
Page 2: ......
