801803
61
Section 5 Service Procedures
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
To reduce the risk of electric shock, fire, explosion, serious injury or death:
• Disconnect all electric power to the machine and accessories before servicing.
• Close gas shut-off valve to gas dryer before servicing.
• Never start machine with any guards/panels removed.
• Whenever ground wires are removed during servicing, these ground wires must be
reconnected to ensure that the machine is properly grounded.
• Washer motor not grounded! Disconnect electric power before servicing motor.
W502
WARNING
44. WASHER LOADING DOOR
a. Unlatch and open loading door.
b. Remove door bezel by prying inside lip up and
forward with fingers. Refer to Figure 17.
c. While supporting loading door, remove screws,
lockwashers and nuts holding loading door to
hinge assembly and remove door. Refer to
Figure 17.
Figure 17
H212SE1A
Door Bezel
Attaching
Screw
Inner
Door And
Glass
Door
Bezel
Hinge
Assembly
Nut
Lockwasher
Door
And
Glass
Screw
