Alliance Laundry Systems F232198R4, Operation & Maintenance Manual

Page: 13 / 26

Operation
11
F232198 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Display Indicators
Table 1 lists various displays and what they mean. The operator should become familiar with these machine
displays.
Display Meaning
bLCH
Control will also light “add bleach” indicator (only if SUPPLY 2 alone)
---C
The first 3 digits are reserved for temperature reading, C indicates “degrees Celsius”
SPEC
Special time of day pricing in effect, Vend models only
---F
The first 3 digits are reserved for temperature reading, F indicates “degrees Fahrenheit”
FILL
“Fill error” – machine did not fill to programmed water level within 10 minutes, displays
during Rapid Advance Mode (if enabled)
dOOr
“Door” opened during cycle
SHUt / dOOr
Machine user must “shut door” of the washer to allow the cycle to begin
CAnt / OPEn
Control cannot unlock the door
dOnE
Cycle has concluded
----
Flashes for a period of time (for safety) after power up while keeping outputs OFF
01
Approximately one minute remaining in cycle (shows on display as right justified)
250
Vend remaining to be satisfied (shows on display as left justified)
Err
Card reader error
bAL/xxxx
Balance remaining (card system) is “xxxx” (xxxx = cash balance)
PULL/CArd
Remove card from card reader slot
Adv
Rapid Advance, displays during Rapid Advance mode (if enabled)
Erdn
Drain count error (will display for certain models)
Erfl
Fill error count (will display for certain models)
E Pr
The number of times power has been interrupted during a cycle (will display for certain
models)
CyC
Cycle counter
USH1
“Wash 1” segment, displays during Rapid Advance Mode (if enabled)
USH2
“Wash 2” segment, displays during Rapid Advance Mode (if enabled)
USH3
“Wash 3” segment, displays during Rapid Advance Mode (if enabled)
USH4
“Wash 4” segment, displays during Rapid Advance Mode (if enabled)
rIn1
“Rinse 1” segment, displays during Rapid Advance Mode (if enabled)
rIn2
“Rinse 2” segment, displays during Rapid Advance Mode (if enabled)
rIn3
“Rinse 3” segment, displays during Rapid Advance Mode (if enabled)
rIn4
“Rinse 4” segment (final rinse), displays during Rapid Advance Mode (if enabled)
drAI
Drain step, displays during Rapid Advance Mode (if enabled); also indicates machine is in
drain step during test cycle in 2-speed models
Table 1 (Continued)